Getting error ( 0x80072EE2 ) when trying to activate Microsoft Office. Firewall is set to allow Microsoft updates. Any thoughts? Do not want to call in to activate every time I upgrade\add a Microsoft product.
↧
Office Activation error 0x80072EE2
↧
Double Natting behind Sonciwall
So we have a small network, we are trying to cheaply divide both networks but share only the internet.
The main network 1 is a 192.168.10.1-254 network. The main sonicwall ns220 is connected to our wan ISP and the sonicwall IP is 192.168.10.254
Network 2 is connected to our network and we configured a TZ205 sonicwall with a WAN IP of 192.168.10.10 which is phyiscally plugged from the WAN port to a switch on our network 1. Network 2 sonicwall TZ205 is lan IP of 192.168.1.254 and we have it doing dhcp of 192.168.1.1.-254
Not everything is working fine we are getting internet on network 2 but from network 2 we can still see computers and equipment on network 1. For example when we do an IP scan on the network we see all the network machines on 192.168.10 network show up and we can access them.
Is there anyway to block it so neither network...
↧
↧
Filezilla FTP failure 550
Previously, we had 2 firewalls because Filezilla ftp service cannot coexist with the other firewall. We recently received a new firewall and was planning to use just one firewall but it doesn't look like it will work this way. Sonicwall solution was 2 firewalls.
We use Filezilla for passive mode FTP and the firewall settings in the Sonicwall Dynamic Ports for FTP Transformation is set to IKE (Key Exchange). Our AS400 server must be set to FTP for the FTP Transformation otherwise it cannot access it. I thought if I created an service group that include both IKE (Key Exchange) and FTP, it will allow me to use both, but it doesn't. Filezilla will still get a 550 error. Can this be done or do I need to revert back to 2 firewalls?
↧
New Internet Setup
A location with 10 computers wants only one of the computers to have access to the new backup internet service. The current internet service will only be utilized by the other 9 computers and will remain as the primary ISP for the office.
The single computer that will be the only device that has access to the new backup internet service will still need to be able to access the on premise server and printers, etc.
There is only one Sonicwall firewall and one switch device.
What would be the best way to set this up?
How do I route the traffic for only that single computer to use the backup internet service?
↧
[Solved] Filezilla FTP failure 550
Previously, we had 2 firewalls because Filezilla ftp service cannot coexist with the other firewall. We recently received a new firewall and was planning to use just one firewall but it doesn't look like it will work this way. Sonicwall solution was 2 firewalls.
We use Filezilla for passive mode FTP and the firewall settings in the Sonicwall Dynamic Ports for FTP Transformation is set to IKE (Key Exchange). Our AS400 server must be set to FTP for the FTP Transformation otherwise it cannot access it. I thought if I created an service group that include both IKE (Key Exchange) and FTP, it will allow me to use both, but it doesn't. Filezilla will still get a 550 error. Can this be done or do I need to revert back to 2 firewalls?
The fix:
Basically, the problem was both FTP servers cannot be used on the same firewall with the same port....
↧
↧
DR Site Setup - NSA 3600
Hello All,
I have recently taken upon the Network Analyst position within my company (recently graduated as well). I am a bit inexperienced which is why I am reaching out for some advice.
My company recently decided that we would like to setup a disaster recovery site. We have an NSA 3600 at our Corporate office and at our DR site. Both sites are connected via MPLS and our recently installed OPT-E-WAN Point-to-Point which runs "directly" between our Corporate office and DR site (AT&T private line). Our corporate office is our data center which houses all of our servers and such. Our plan is to replicate all of this data to our DR site in case of a disaster at Corporate.
Initially I thought that we could setup an additional Site-to-Site VPN for the OPT-E-WAN connection and then use routing rules to route traffic accordingly. The NSA...
↧
join the domain from home office
hey guys, need a little help. I have a computer I need to join to domain. The computer is located at my home office. The company has a sonicwall firewall, and I have access to the vpn connection to get onto the network at the office.
Problem is, after connecting to vpn, I try to join the domain, but get an error the AD DC could not be contacted:
The error was: "DNS name does not exist."
(error code 0x0000232B RCODE_NAME_ERROR)
The query was for the SRV record for _ldap._tcp.dc._msdcs.barneys
The office uses 192.168.1.5 for DNS, I get 50 packet loss
any help please
↧
How to improve file transfer speed between VLANs
NSA2650 (HA)
SonicOS
6.5.1.1-42n
20 VLANs
1Gbps/1Gps Internet connection
After I replaced pfSense with SonicWall, the file transfer speed decreased a lot. Because there are no changes on the network switches (Netgear M4100), I assume that I should optimize the NSA2650.
I unchecked on Gateway AV Service, IPS, Anti-Spyware Service, and App Control Service on all Zones for VLANs.
Only WAN has Gateway AV, IPS, Anti-spyware now.
Is there anything I should take a look to improve the speed? It is around 10-20MB/sec, which used to be 50 or more MB/sec before.
Is there anything I should take a look? I am new to SonicWall. Any advice is appreciated.
Best regards,
↧
SonicWALL and PXE Boot on different sites
I have two sites - one in Colorado and second in Texas. Each site uses separate SonicWALL TZ 300.
Both sites have dedicated DHCP servers installed on domain controllers not on SonicWALL appliances. In Colorado, I have WDS server that hosts bootable images. I can deploy windows images using pxe boot in Colorado site. My question is how do I go about configuring SonicWALL in Texas to allow clients to pxe boot from Colorado WDS server. I know that there are two options one is to use option 66 and 67 in DHCP server or use IP helper.
I tried to use DHCP options stated about but it was not successful. I am thinking to use IP helper option but not sure about it. Since, each site has its own DHCP servers that serve IP addresses to their dedicated subnets. Do I just create IP helper with WDS server on Texas SonicWALL? It seems if I add DHCP...
↧
↧
Ubiquiti & Sonicwall
Looking at replacing our currently "dead in the water" wifi kit with Ubiquiti stuff - probably the AC-HD access points with cloud controller
We currently have Cisco 4400 controller an AP1242's. (configured by external IT provider - an still maintained by them*)
Currently (when working) we have 3 ssids domain, factory and guest.
Domain & factory seem to operate the same - same IP scope etc. from a Win Server. Guest ssid uses the sonicwall DHCP on a total different range
From the current setup i cant see any physical connections from the sonicwall to the cisco controller, so would assume there is some sort of vlan somewhere - or is that a wrong assumption?
I dont know how to configure the Ubiquity with two seperate dhcp server for each ssid?
Looking at doing this my self as there is a massive saving to be had an quite like getting my hands...
↧
Sonicwall NSV in Azure - When
Has anyone got any information on when the NSV will be released into Azure ?
i'm not managing to find much information.
↧
Connecting 3 Sonicwalls
we have 2 offices currently connected via site to site vpn aggressive mode using Sonicwall TZ300 at each site.
we are now opening a third office in the USA What is the best way to go in connecting the 3 sites should i be looking at hub and spoke or individual vpn site to sites to each site?
↧
Sonicwall VPN authentication not working with LDAP Groups
So I had setup our sonicwall to our VPN ldap group to authenticate users, which was working fine, however now that the firmware was upgraded to
6.5.0.2-8n
now, just importing the LDAP group doesn't work, but I also have to import the users and add them to the imported LDAP group.
I made sure that the user group for XAUTH was the LDAP group.
I just don't know why all of a sudden I cannot just import the LDAP group, but also add users to the group. Can anyone help me out with this please
↧
↧
SonicWall Content Filter dpi-sll ldap users
Hello,
I have a NSA 3600 Sonicwall for filter internet on my school.
I activate the DPI-SSL : work well :) the httpS websites are correctly blocked.
I also have GMS-Analyzer for stock and read logs,
I also have SSO agent on my LDAP for idenficate my users.
When i try to read the logs on the analyzer :
When a http website is blocked : i know the user name who try to go on this website
When it's a httpS website ,who is blocked, the username is not displayed ? why ? Do you have any idea ?
on this pic you can see a user (p.test) is identificated , he try to go on game website who is blocked.
Work well
On this pic , you can see a user try to go on https game website , blocked but i don't know who is this user: (https://www.gamekult.com)
Thank's
↧
different DHCP setting for different VLANs
Hi,
I want to setup a multi ssid AP with company and guest ssid's. I want the company one to get DHCP from a server on the LAN and the guest to get DHCP from a SonicWALL TZ300. The SSIDs will have different VLANs, can Assign DHCP on the SonicWALL only to respond to a particular VLAN?
Thanks!
↧
Sonicwall Mobile Connect on iPad
We are having a weird issue where one of our iPads that we purchased for our end users is not able to connect to a VPN connection via WiFi using the Sonicwall Mobile Connect app
This is what we have done so far:
(This works) Connect over LTE data connection works 100%
(This does not work) Connect to any WiFi and attempt the VPN connection, we either get the message that the internet connection appears to be offline (within the SW app) or it says the server is unavailable.
We have also tested the same methods on other iPads and all of the others work just fine on a WiFi connection.
I do have a support ticket open with Sonicwall support on this. The SW app is for connecting to customer networks to provide remote support.
I do have another VPN app for our corporate VPN and it works fine while connected to WiFi.
Not sure why the app is being a...
↧
VPN issues when remote employees make Skype calls to corporate office
Hello All,
We have Sonicwall firewall in our environment. I'm having a weird problem with VPN and Skype. VPN and Skype works just fine until any remote employee make a Skype call to specifically another employee who is inside the corporate office. The remote employee will lose connection to the internet and will lose access to the internal corporate resources too. The only thing that I can ping after that Skype call is the WAN interface of the firewall.
Making calls from a remote employee to any other Skype users that are not inside the corporate office work just fine. Making calls from inside the corporate to any other Skype users except remote employees works fine too.
App control is already disabled. Logs doesn't show anything that could lead to the problem. I've tried to use vpn over ssl client and it worked fine. Making that Skype...
↧
↧
Sonicwall CPU Processor Log Alert
Hi all,
Occasionally we have a firewall that spikes in CPU usage from time to time. Are there any specific log alerts that I can setup for email that would show this. I am currently digging through mass list of alerts, but so far no success.
Thanks.
↧
Sonicwall site to site can't ping pbx server
I have one server i cannot ping over our site to site vpn (not sure if that is related) both sites are connected by Sonicwalls
i can ping all other servers/devices across the vpn at both sites but this one server which i need to sort the routing out for phones to this server but so far stuck even pinging it.
Server is up and working at main site and dns settings correct
anyone any ideas.
icmp enabled
disabling firewall makes no difference
↧
Dmz has no internet access
Hi everybody, new here. Had my dmz setup the way it should but to finish i needed to download a net framework. I couldn't get out into the web. Any ideas? Using a NSA2600.
Exact same setup as this older post. https:/
↧