Hello all.
I have site A (main) and B satellite office with IPsec VPN tunnel (Sonicwalls).
At this time, everything is working great for the phones on both sites and I was using options 128, 129 and 130 in the DHCP server (Windows). I am trying to setup two VLANs for data and voice and have Windows DHCP server still give IP addresses. The Mitel 5000 phone system is at the site A.
I am trying to figure out how to do this starting on site B since it’s only one phone there.
Diagram site B:
Windows server 2008 R2 – 192.168.127.9
DHCP server with two scopes ---
Main scope 192.168.127.0 with options 03,06,15 and 43 for Mitel Phones with value id:ipphone.mitel.com;sw_tftp=192.168.123.7;call_srv=192.168.123.7;vlan=10;l2p=6;dscp=56
second scope 192.168.10.0 with 03,06,15, and 43 with value...