We'd currently had a site to site VPN configured and I'm trying to setup our new BT P2P between two sites, I've never actually configured before.
At the moment I've got Site B to be able to talk to Site A i.e I'm able to RDP and Ping servers, network etc.. but from site A I can't ping or RDP to site B.
Site B firewall can ping all of VLAN 1 and VLAN10 including Site A.
Site A firewall can ping all of VLAN1 but not VLAN10 or Site B. However the Site A switch can ping all of VLAN1 and VLAN10 including Site B.
Is this a firewall issue on Site A?
Site A Setup:
Sonicwall Nsa3650
Netgear L3 switch
BT Circuit > configured to use VLAN10
VLAN1 (Default): 200.1.5.0/24
VLAN10 (P2P): 172.16.10.0/29
Switch:
P2P plugged into Port 25, Tagged VLAN10, PVID set to 10, Port Mode General
Firewall plugged into Port 48, Tagged VLAN10, PVID set to 1, Port Mode...