I am building out a new network for a customer using a SonicWALL and HPE 1950 Switches. I am building 3 VLANs which are built on the SonicWALL through the Interface Settings page:
- VLAN 1 - Default
- 192.168.0.254/24
- VLAN 10 - Workstations
- 192.168.1.254/24
- VLAN 20 - VOIP
- 192.168.2.254/24
- VLAN 30 - Guest
- 172.16.33.254/23
I have DHCP on the SonicWALL for each VLAN.
On the 1950 switch, I built the VLANs and added DHCP Relays for each of them to the SonicWALL IP in the VLAN. I've also set the uplink port to the SonicWALL on the switch to permit VLAN 1,10,20,30, but I can't get any traffic through to the SonicWALL except on VLAN 1.
I can however, from VLAN 1, ping 192.168.0.254 and 192.168.1.254, so I'm not sure what I've missed. I've setup VLANs on SonicWALLs before, but I've never worked with the HPE 1950s before. Only the Aruba line and...